Select Page

RUTX11 Mobile

Summary #

The Mobile page is used for setting parameters related to the mobile data connection. This page is an overview of the Mobile section for RUTX11 devices.

This manual page provides an overview of the Users windows in RUTX11 devices.

If you’re having trouble finding this page or some of the parameters described here on your device’s WebUI, you should turn on “Advanced WebUI” mode. You can do that by clicking the “Basic” button under “Mode”, which is located at the top-right corner of the WebUI.

General #

The General section is used to configure the SIM card parameters that define how the device establishes connection and uses other, mobile related, useful features.

SIM card settings #

The SIM card settings section is used to configure main SIM card parameters. Refer to the figure and table below for information on the fields contained in that section. 

Field NameValueDescription
Default SIMoff | on; Default:onSet this SIM slot as default
Deny data roamingoff | on; Default: offDeny data connection on roaming
Service modeDefault: AutoYour network’s preference. If your local mobile network supports UMTS (3G) or LTE (4G) you can specify to which network you prefer to connect to. Available options:Auto4G (LTE) only3G only
PINDefault: ” “SIM card’s PIN (Personal Identification Number) is a secret numeric password shared between a user and a system that can be used to authenticate the user

SMS limit settings #

The SMS limit settings section provides you with the possibility to set SMS limit for your SIM card.

Networking RUTXxx manual mobile general sms limit settings v1.png
Field NameValueDescription
Enable SMS Limitoff | on; default: offEnable of disable SMS limit feature
SMS limit countDefault:Disable SMS sending after limit value is reached
PeriodDefault: DayPeriod for which SMS limiting should apply. Available options:DayWeekMonth

This section also contains one button – Clear SMS limit. When clicked, the button resets the sms limit counter for the related SIM card. Thus, the count is started over again regardless of the specified period.

SIM switch #

In SIM switch section you can configure SIM switching rules, i.e., set up circumstances under which the device will perform a switch from using one SIM card to the other. Refer to the figure and table below for information.

Networking rutos manual mobile sim switch settings v1.png
Field NameValueDescription
Enable automatic switchingoff | on; default: offAutomatically switch between primary and secondary SIM cards based on the various rules and criterias
Check intervalinteger; default: 10The frequency at which the router will check for condition changes corresponding to SIM switch rules. If such a condition exists, the router will perform a SIM switch, if not – it will check for the same conditions again after the amount of time specified in this field.
Attempts before SIM switchinginteger; default: 3Amount of the check attempts for condition changes corresponding to SIM switch rules.
On weak signaloff | on; default: offPerform a SIM card switch when a signal’s strength drops below a certain threshold
On data limitoff | on; default: offPerform a SIM card switch when mobile data limit for your current SIM card is exceeded
On SMS limitoff | on; default: offPerform a SIM card switch when sent SMS limit for your current SIM card is exceeded
On roamingoff | on; default: offPerform a SIM card switch when roaming is detected
No networkoff | on; default: offPerform a SIM card switch when network isn’t detected
On network deniedoff | on; default: offPerform a SIM card switch when network is denied
On data connection failoff | on; default: offPerform a SIM card switch when data connection fails

Network operators #

The Network operators tab provides you with the possibility to scan for and manually manage mobile network operators to which the device’s SIM card can connect to. Operator selection is only available for the primary SIM card. In order to specify an operator for the other SIM card it must first be selected as the primary SIM in the SIM Management section.

Networking RUTXxx manual mobile network operatorts scan settings v1.png

Operators scan settings #

As default Connection mode is set to AUTO, although to initiate a scan, select connection mode Manual, press Scan for operators and then you will be prompted with a pop-up asking if you wish to proceed. This is because while the scan is in progress you will lose your data connection for up to 3 minutes.

Networking RUTXxx manual mobile network operatorts manual scan v1.png

In order to configure a specific band, simply select which one you want to use and press Save & Apply

Submit a Comment

Your email address will not be published. Required fields are marked *