Select Page

RUTX11 NTP

Summary #

Network Time Protocol (NTP) is a networking protocol for clock synchronization between computer systems over packet-switched, variable-latency data networks. This chapter is an overview of the NTP section for RUTX11 devices.

General #

The Time Synchronization section lets you select time zone, enable GPS synchronization and synchronize the time.

The figure below is an example of the Time Synchronization section and the table below provides information about the fields contained in that section:

Networking rutx ntp general v1.png
FieldValueDescription
Current system timetime; default: noneCurrent local time of the device.
Sync with browser-(interactive button)Click to synchronize device time to browser time, if your device time is not correct. Note – to synchronize to correct time zone you first have to click Save & apply, as Sync with browser button checks currently saved time zone.
Time zonetime zone; default: UTCThe device will sync time in accordance with the selected time zone.
GPS Synchronizationoff | on; default: offEnables periodic time synchronization for the system using the GPS module which does not require an Internet connection.

NTP #

This section is used to configure NTP client, server and time servers.

NTP Client #

Networking rutx ntp ntp client v1.png
FieldValueDescription
Enable NTP Clientoff | on; default: onTurns NTP on or off.
Force Serversoff | on; default: offForces unreliable NTP servers.
Update interval (in seconds)integer; default: 600Defines how often the device will update the time.
Offset frequencyinteger; default: 0Adjusts the minor drift of the clock so that it will run more accurately.

Time servers #

The Time Servers section displays the NTP servers that the device uses. You are provided with 4 default time servers (as seen in the example below), but you can also add custom time servers by clicking the “Add” button or you can edit the given time servers.

Networking rutx ntp ntp time servers v1.png

NTP Server #

The device can also act as an NTP Server, providing clock synchronization to other devices in the network. From this section you can turn this feature on or off:

Networking rutx ntp ntp server v1.png

Submit a Comment

Your email address will not be published. Required fields are marked *