Select Page

RUTX11 Profiles

Summary #

Configuration profiles provide a way to create multiple distinct device configuration sets and apply them to the device based on current user requirements. This chapter is an overview of the Profiles page in RUTX11 devices.

Configuration Profiles #

This section displays user defined configuration profiles:

Networking rutos manual profiles configuration profiles.png

To create a new profile, configure the device in accordance with your needs, go to this page, enter a custom name for the profile and click the ‘Add’ button. A new profile with the given name will appear in the “configuration profiles” list:

Networking rutos manual profiles configuration profiles add new profile.png

The ‘Apply’ button applies the adjacent configuration on the device.

Scheduler #

The Profile Scheduler provides a possibility to set up a schedule of when the device should use one profile configuration or another.

General Configuration #


The General Configuration section is used to enable the Scheduler itself. Created instances won’t work unless this option is turned on.

Networking rutos manual profiles scheduler general configuration.png

Profile Scheduler Instances #


The Profile Scheduler Instances section allows you to create profile Instances to be enabled during specific time intervals. To add a new Instance click Add button.


Note: new Instance can only be created if there is at least one custom profile created.

Networking rutos manual profiles scheduler profile scheduler instances.png

Profile Scheduler Instance Configuration #


This page is used to configure profile, time and day of selected scheduler instance. Refer to the figure and table below for information on the Profile Scheduler Instance Configuration fields:

Networking rutos manual profiles scheduler profile scheduler instance configuration.png
FieldValueDescription
Enableoff | on; default: offEnable selected instance for scheduler.
Profileprofiles; default: noneSelect profile which will be applied during specified time interval.
Interval TypeWeekdays | Month Days; default: WeekdaysDepending on your needs select whether you want to configure weekdays or specific month days.
Start Timetime; default: 12:00Enter time of the start of interval in which scheduler will switch profiles.
End Timetime; default: 12:00Enter time of the end of interval in which scheduler will switch profiles back.
Interval Type: Weekdays
Start DayWeekday [Monday..Sunday]; default: SundaySelect a day of the start of interval in which scheduler will switch profiles.
End DayWeekday [Monday..Sunday]; default: SundaySelect a day of the end of interval in which scheduler will switch profiles back.
Interval Type: Month Days
Start DayDay of month [1..31]; default: 1Select a day of the start of interval in which scheduler will switch profiles.
End DayDay of month [1..31]; default: 1Select a day of the end of interval in which scheduler will switch profiles back.
Force last dayoff | on; default: offForce intervals to accept last day of month as valid option if selected day doesn’t exist in ongoing month.

Submit a Comment

Your email address will not be published. Required fields are marked *