Select Page

RUTX11 System

Table of Contents

Summary #

The System window displays basic information related to the device’s hardware, software and memory state.

If you’re having trouble finding this page or some of the parameters described here on your device’s WebUI, you should turn on “Advanced WebUI” mode. You can do that by clicking the “Basic” button under “Mode”, which is located at the top-right corner of the WebUI.

Networking rutx manual webui basic advanced mode v1.gif

System #

The figure bellow is an example of the System page and the table below provides information on the fields contained in that page: 

Field NameDescription
Device nameThe device’s brand name.
Product codea.k.a., ordering code, displays under which product code the device was manufactured. Different product codes indicate different versions of the overall product. For example, devices with different product codes may support different LTE bands, come with different accessories, different firmware, etc.
Serial numberA unique 10-digit device identifier. It is required when connecting the device to Teltonika’s Remote Management System (RMS). The device can be added to RMS via the Services → Cloud Solutions → RMS page.
Hardware revisionA 4-digit number representing the router’s hardware revision version.
Batch numberA 4-digit number that indicates the batch of materials.
ModelThe modem’s model number.
IMEIThe IMEI (International Mobile Equipment Identity) is a unique 15 decimal digit number used to identify mobile modules. GSM network operators use the IMEI to identify devices in their networks.
FW versionModem’s current firmware version.
Firmware versionDisplays the firmware version currently installed in the device. The firmware can be upgraded from the System → Firmware page.
Kernel versionDisplays the device’s kernel version. A kernel is a computer program responsible for connecting a device’s software to its hardware
Local device timeDisplays the current time as perceived by the device. Time settings can be adjusted in the Services → NTP page.
UptimeDisplays the amount of time that has passed since the device’s last start up.
Load averageDisplays the device’s CPU load average (in %) over the last minute, 5 minutes and 15 minutes.
RAM usedDisplays the amount of currently used random-access memory (RAM).
RAM BufferedDisplays the amount of random-access memory (RAM) used by temporarily stored data before moving it to another location.
Flash usedDisplays the amount of currently used flash memory.

Submit a Comment

Your email address will not be published. Required fields are marked *